Thermal Effects of Microwave Energy in Agricultural Soil Radiation

The thermal treatment by millimeter waves for the soil disinfection can be one possible alternative to chemical treatments. This physical method is based on incrementing the soil temperature and its pathogens irradiating with high frequency electromagnetic waves. So the previous knowledge of the temperature distribution in the irradiated soil is essential for achieving an effective bad microorganism and weed seeds elimination. This report analyse the heating kinetic and spatial distribution of the maximum temperatures reached by the soil. It is presented a mathematic model about how are distributed the reached temperatures in the depth of the irradiated soil. This model concludes that when an orchard soil is irradiated superficially by microwaves, the microwaves have a big attenuation due to the soil dielectric properties and the water located in the pores of the most superficial layer. This fact causes a shield effect blocking the waves penetration in few centimetres. The heating by radiation is reduced to the superficial layer. The heating propagation in the depth is occurred by conduction following the Fourier equations.     

中高温工质在蒸发器中的换热模拟分析

本文采用分布参数的方法,建立了水源热泵中普遍采用的壳管式蒸发器稳态数学模型.通过中高温水源热泵试验台的实验数据同模拟计算结果的对比,验证了数学模型的准确性。应用此数学模型对中高温工质HTR01、HTR02及R134a在蒸发器典型制热运行工况,进行了模拟计算。得出了三种工质制冷剂侧换热系数沿管长的变化关系并对三种工质的换热性能进行了对比分析,为采用中高温工质的水源热泵换热器设计提供了参考依据.     

Excitation of plant growth in dormant temperature by steady magnetic field

Experimental results of applying a steady magnetic field (20 and 30 mT) on agricultural plants reveal that their growth is more than that of control plants. Considering that these plants have ferritin cells, and each ferritin cell has 4500 Fe atoms, it is obvious that they have an outstanding role in the plants’ growth. As the last spin magnetic moment (SMM) of the Fe atom posed to an external magnetic field (EMF), the composition of SMM and EMF create an oscillator in the system. Then we have a moment of force on ferritin cells. This oscillator exerts its energy, then damps and finally locates in the field direction. The relaxed energy increased the internal temperature (i.e., the effective temperature of the magnetic spin system of plant) so that it is situated in a proper temperature for growing. This phenomenon (temperature increasing) occurs in the initial minutes of applying the magnetic field. So it depends on the number of times of locating the plant in magnetic field in a day (n). If this number (n) passes the critical value, the plant reaches a burning temperature and growth is perturbed. In this paper, the plant growth rate and critical temperature in a steady magnetic field were investigated and formulated theoretically. An innovative result in this research is as follows: if a plant's environment was in the dormant temperature, we could increase the internal temperature of the plant by applying a magnetic field n times in a day (for growth).     

CH分子束的强度与CH4/He混合配比的关系及CH(A2△)振转温度的计算

为了获得CH分子束及其相关特性,以氦气为载气,利用直流脉冲放电技术产生了CH分子束.实验记录了放电时间相对于脉冲分子束不同延时CH光谱信号强度的变化,放电相对延时为460μs左右获得最大的信号强度.研究了在保持CH4/He总气压3 atm和放电电压-4 kV不变的条件下CH分子束强度与不同配比的关系,建立了理论模型,对实验数据进行了理论拟合,拟合曲线与实验结果符合较好,配比为1%(甲烷与氦的气压比为1:99)左右能够维持较稳定的放电现象和较强的放电强度而获得较强的CH自由基束流.在这一配比下对CH(A2△-X2П)(0,0)带发射光谱进行探测和分析,获得CH(A2△)转动温度和振动温度分别为2455 K和4575 K,并估计此时每个脉冲中大约包含1013～1014个CH自由基.     

Low sintering temperature MnZn-ferrites for power applications in the frequency region of 400 kHz

In this paper, the effect of cubic zinc metaborate Zn₄O(BO₂)₆ on the sintering of MnZn-ferrites for medium frequency power applications is investigated. Zinc metaborate is synthesized in the laboratory using zinc oxide and boric acid as metal precursors. As observed, when zinc metaborate is added to the MnZn-ferrites at an optimum amount of 0.02 wt%, it significantly enhances densification and therefore allows, for a given density, reduction of the firing temperature by almost 200 °C. MnZn-ferrites exhibiting power losses of 70 mW/cm³ (measured at a frequency of 400 kHz, magnetic field 50 mT and temperature of 90 °C) are synthesized from conventionally milled powders with average particle diameter 0.6 μm, compacted and fired at 1100 °C. Identical experiments conducted under the same conditions on specimens without zinc metaborate additions revealed power losses greater than 300 mW/cm³, because of insufficient densification.     

我国低温等离子体研究进展(Ⅰ)

低温等离子体物理与技术的研究在国内受到了越来越多的重视．在等离子体中发现的一些有趣的物理现象，如磁场重联、尘埃等离子体等，使人们对等离子体物理的研究掀起了新的热潮．在应用方面，几乎所有理工类实验室都有涉及低温等离子体技术的实验装置，这使得在我国低温等离子体应用方面的研究非常普及，包括微电子工业中的等离子体工艺，各种坚硬、耐腐蚀、耐摩擦材料的制备，纳米材料的制备，聚合物以及生物材料的表面改性，等等．随着低温等离子体技术的发展，低温等离子体的诊断技术也随之发展起来．文章简要地介绍了近几年来低温等离子体研究在我国的发展，介绍了一些有关低温等离子体的热点研究课题．     

波长检测技术在温度测量中的应用

提出一种波长检测技术实现温度测量的方法,利用FBG传感器对温度等物理量实施监测,具有测试精度高,应用场合不受限制等特点,当环境参数发生变化时,光纤光栅的有效折射率和光栅周期会受到影响,将引起光纤光栅峰值波长的偏移,依据反射光谱结构的变化,可知道其温度的变化趋势。实验测试结果表明,在温度变化0.1°,波长变化1pm,温度和波长具有良好的线性关系。     

Molecular dynamics of MgSiO3 perovskite melting

The melting curve of MgSiO分子动力学 MgSiO3钙钛矿 熔化温度 高压melting temperature, molecular dynamics, high pressureProject supported by the National Natural Science Foundation of China (Grant Nos 10274055 and 10376021),the Natural Science Foundation of Gansu Province, China (Grant No 3ZS051-A25-027) and the Scientific Research Foundation of Education Bureau of Gansu Province, China (Grant No 0410-01).2005-01-125/8/2005 12:00:00 AMThe melting curve of MgSiO3 perovskite is simulated using molecular dynamics simulations method at high pressure. It is shown that the simulated equation of state of MgSiO3 perovskite is very successful in reproducing accurately the experimental data. The pressure dependence of the simulated melting temperature of MgSiO3 perovskite reproduces the stability of the orthorhombic perovskite phase up to high pressure of 130GPa at ambient temperature, consistent with the theoretical data of the other calculations. It is shown that its transformation to the cubic phase and melting at high pressure and high temperature are in agreement with recent experiments.     

多层绝热材料规模化干燥处理时温度场的测试与分析

对大批量处理多层绝热材料的大型专用干燥箱满负荷运行时工作区域的温度场进行测试,通过温度分布和温度场均匀性的分析,得出了最高温度发生点的位置与成因以及影响温度场均匀性的主要因素,并对温度的控制方法、多层材料的布置方案和干燥设备的改进提出了建议。     

基于液晶调制器调制的实时测温系统

分析了一种基于基尔霍夫定律的钽酸锂(LiTaO3)热释电探测器作为接收元件的实时测温系统中,机械式调制盘对测量精度影响,提出了改变机械式调制盘对测量精度的影响的方法;介绍了液晶调制器的结构、对辐射调制的原理以及在使用过程中的优点。设计了利用液晶调制器替代机械调制器的钽酸锂热释电实时测温系统。结果表明,利用液晶调制器改进后的测温系统在给定的温度范围中,测量精度均有明显的改善,符合测量要求。